Omnipure E Series DI Filter Cartridges

PRODUCT DOCUMENTATION Omnipure E Series DI Inline Filters (Spec Sheet) PRODUCT DESCRIPTION The Omnipure E Series DI Inline Filter are available in 2.5″ diameter and 8″ 10″ and 12″ lengths. The E Series in line filters are designed for Deionization or Demineralization (process of removing all dissolved solids from water) They can be used where demand for high purity water is needed. No glues or binders that may cause contamination are used in the manufacturing process. The components of the Omnipure E Series filters are friction-welded together insuring a no-leak seal. All filters should be installed on cold water lines only. NOTE: Activated carbon filters are not intended to be used where the water is microbiologically unsafe or with water of unknown quality without adequate disinfection before or after the unit. The E-Series was designed for our customers that are already using other existing permanent heads in the market place but would like an affordable alternative to the replacement bodies currently offered. E-series cartridges are also available with Omnipure’s proprietary heads. SPECIFICATION Deionization Filter Cartridge Mixed Bed DI filtration media Everpure Compatible Fine filtration of treated drinking water to ingredient water quality Help standardize beverage quality at disparate location Enhance carbonation Reduces maintenance problems in water-using equipment Commercial and residential drinking water applications Food Services Case Quantity: 20 PCs (Pricing is per piece) CONDITION FOR OPERATION Temperature (ºF) (min/max): 35/100 Pressure (psi) maximum: 125 Flush new cartridge with 5 gallons of water prior to use and check for leaks. Replace cartridge when rated capacity is reached, or when flow becomes too slow Install in compliance with state and local laws and regulations