Omnipure E Series Sediment 5 Micron Filter Cartridges

PRODUCT DOCUMENTATION Omnipure E Series 5 Micron Sediment Inline Filters (Spec Sheet) PRODUCT DESCRIPTION The Omnipure E Series 5 Micron Sediment Inline Filters are available in 2.5″ diameter and 6″, 8″ 10″, 12″ & 14″ lengths. The E Series in line filters are designed for Sediment, Dirt and Silt reduction. They can be used in icemakers, refrigerators, under the counter, drinking fountains, beverage equipment, Reverse Osmosis (RO) Systems, and in conjunction with commercial purification systems. No glues or binders that may cause contamination are used in the manufacturing process. The components of the Omnipure E Series filters are friction-welded together insuring a no-leak seal. All filters should be installed on cold water lines only. NOTE: Activated carbon filters are not intended to be used where the water is microbiologically unsafe or with water of unknown quality without adequate disinfection before or after the unit. The E-Series was designed for our customers that are already using other existing permanent heads in the market place but would like an affordable alternative to the replacement bodies currently offered. E-series cartridges are also available with Omnipure’s proprietary heads. SPECIFICATION Sediment Filter Cartridge Removes: dirt, grit, sand, rust and other solid particles Polypropylene filtration media Everpure Compatible Fine filtration of treated drinking water to ingredient water quality Reduces maintenance problems in water-using equipment Commercial and residential drinking water applications Food Services Case Quantity: 20 PCs (Pricing is per piece) CONDITION FOR OPERATION Temperature (ºF) (min/max): 35/100 Pressure (psi) maximum: 125 Flush new cartridge with 5 gallons of water prior to use and check for leaks. Replace cartridge when rated capacity is reached, or when flow becomes too slow Install in compliance with state and local laws and regulations Rated Capacity: N/A Dependent upon the quality of the influent water